Author Topic: A "different" Trapdoor  (Read 3049 times)

Offline mazo kid

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2028
  • Newbie
    • View Profile
Re: A "different" Trapdoor
« Reply #15 on: July 23, 2016, 11:47:41 AM »
Scooby, yes I used the old timey Winchester stain/oil sanded in with many coats. Sorry to be so tardy in getting back to the thread.

Offline bigted

  • Sr. Member
  • ****
  • Posts: 278
  • when all is said ... more will be said then done.
    • View Profile
Re: A "different" Trapdoor
« Reply #16 on: October 27, 2018, 06:03:52 AM »
This is an old post, however i would like to resurrect it for the originality of the trapdoor project.

Where did you find the stock?
BIGTED

Offline mazo kid

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2028
  • Newbie
    • View Profile
Re: A "different" Trapdoor
« Reply #17 on: October 27, 2018, 10:28:25 AM »
Ted, the stock was a pre-carve ordered from George Peterson (Treebone Carving) a few years ago. I was working on it when we had an indoor "flood" while we were away and the stock got wet. When we got home the wood was swollen, stained, rusty. I was so upset/disappointed that I set it aside for several months before finally deciding to see if I could rescue the project.

Offline Len

  • Full Member
  • ***
  • Posts: 152
  • Bloody foreigner
    • View Profile
Re: A "different" Trapdoor
« Reply #18 on: October 29, 2018, 09:25:35 AM »
A very nice job there, Mazo