Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Ringo

Pages: [1] 2 3 ... 12
Schneider & Glassick / Re: Searching for S&G
« on: December 06, 2017, 03:30:34 AM »
I can't sell you anything from my own collectio due to US regulations. My advice would be to keep watching Gunbroker and get yourself one of the EIG Navies that pop up there quite regularly. To me they are the best Schneider & Glassick replicas taht were made, either plain or engraved. The prices may a bit overblown, but I guess you can talk the sellers into lowering them. One strong point is that the markings are very discreet. No "black powder only" on the barrel and so on...

Brass and Other Cartridge Casings / Re: Cartridge Boxes
« on: November 16, 2017, 03:01:47 PM »
Your 1860 COlt looks brand new. Why should your cartridge boxes not look brand new too?  :)

General Discussion / Re: What would you like?
« on: November 09, 2017, 01:45:37 AM »
I did turn a 1851 into a Dance & Brothers by milling the recoil shield off and sanding the naval battle off the cylinder. Still I know that I did it, and that it was not a proper Dance from the start.  :(

General Discussion / Re: What would you like?
« on: November 08, 2017, 11:50:35 PM »
Leech & Rigdon, and Dance & Brothers in .36 caliber.

General Discussion / Re: Books
« on: August 14, 2017, 01:15:37 AM »
The Story of Colts Revolver,  The Biography of Col. Samuel Colt  by  William B. Edwards  1953.
Thanks to your message, I went out to look for a copy, found one, got it and started reading it. I've only got to page 120 as of yet, but I can tell it is a fascinating read. Thanks for your advice Krylandalian.  ;D

Army Models / Re: Unknown 1860
« on: July 02, 2017, 02:20:07 AM »
Glad I can be of assistance to start a conversation.   ;)
Sorry to crash into your thread that way. Thanks for having us. :)

Sounds good to me.  I've never heard of Riva Esterina until now.  What other trade marks did they use?
As far as i know, they also used DART as a trademark, in addition to their own name. So they used at least 3 different trademarks:
- PR for black powder replicas of handguns and long arms,
- DART for side arms such as Python, Black Widow and DObermann,
- Riva Esterina at least for carbines such as the Pony Carbine and the Texas Carbine.

Army Models / Re: Unknown 1860
« on: July 01, 2017, 12:40:20 PM »
A couple years ago, I sent an inquiry to the Consorzio Armaioli Italiani asking if they knew who was hiding behind the PR mark, and this is what Ms Monica Cancarini answered:
"PR is a proof mark for RIVA ESTERINA. The company stopped their production at the end of 1979/1980 (more or less)."
This being consistent with what the proofhouse told me, I believe PR to be one of the trade marks Riva Esterina used.

Schneider & Glassick / Re: Help identifying gunmaker
« on: May 16, 2017, 03:18:57 PM »
A gun kit such as this model has a barrel, a frame, and a cylinder. It is designed to be assembled and to shoot. So each piece has to be proofed before it goes into the kit. It is just a matter of safety. That's the way we see it in Europe anyway.
Once each piece has been proofed, it bears the proof markings, including the date code. I don't know if this was mandatory back in the 1960s and 1970s, but it is now.

Thanks for the answer, Valforgettaboutit.
The problem for me is I can't have access through my local library as I don't live in the U.S.A.
Oh well.... I guess I'll just have to make do without it, as I did before I knew it existed...  )lI

(...), while doing research on this guy I also found an old NY Times article on Val first bringing these guys over from Italy, has a great photo of him and a table full of Colts.
Hi Valforgettaboutit, congrats on your buy, you really have got yourself a piece of history. Of course it never saw the Old West, but it is a witness of the very first days of replica making.
Have you still got this article you mention, and could you share a copy?

NEW MEMBER CHECK-IN / Re: Happy to be here
« on: April 22, 2017, 01:22:05 AM »
Welcome to the Club!

General Discussion / Re: Favorite - now defunct - Importers
« on: March 09, 2017, 06:36:39 AM »
Navy Arms, Replica Arms (El Paso), and EIG.
Navy Arms for the same reasons as LonesomePigeon. Replica Arms (El Paso) because they are scarce. EIG because they imported my well-beloved GLBs.

It took me more than a year since I posted here (in fact it took me more than 5 years since I started my search) but I have found another gun bearing the Euromanuarms marking.
The thing is it is not a GLB, and neither is it a replica :

As you can see, it is a side by side shotgun, same kind as I mentioned before, except it is a 16 gauge.
Now for the markings inside the frame :

They show that the gun has been made in 1970 (XXVI) by FIAGG (the maker's mark, although faint, can be seen below the serial number). FIAGG is the acronym standing for Fabbrica Italiana Armi Gnali Graziano, aka Armi Gnali, a rather rather well-known Italian shotguns maker.

The Euromanuarms marking being present on guns made by two different gunsmiths, we can infer that it was not a gunsmith's mark but rather a wholesaler's, probably not more bound to one than to the other. We can add that is was in business at least between 1968 and 1970. Until we find another gun bearing this mark, i'd say this is about all we can claim about it.

Schneider & Glassick / Re: Historiclally Accurate S & G's
« on: March 02, 2017, 09:12:42 AM »
I am fully on Sourdough's side on this. ASPs and GLBs are definitely collectible items. ASP was absorbed by Euroarms in the early 2000's. GLB sank without a trace in 1971. That only makes them collectible, as they are witnesses of the early times of italian replica making and the craft that was used to make them. Remember how original black powder Colts were considered until the 1960's.
Every black powder revolvr collection should include at least one of them, ditto for ASMs, Palmettos, GAMIs, Mavis, and so on.

J.H. Dance / Re: Dance Revolvers
« on: January 28, 2017, 12:29:36 PM »
(...) My only choice, as I see it, is to buy a Pietta 1851 Navy .36 steel, mill off the recoil shields, color-case the new areas (or full frame), and install the G&G part round/part octagon .36 barrel. (...)
If you go that way, Jim, do not bother to color case the frame. From all the pictures I have seen of original Dance revolvers, it seems quite obvious that the frames were blued, just like the other iron parts.

If you look at the pic that I posted, you will notice that I did in fact remove the case coloring and blued the frame.
and right you were !

Pages: [1] 2 3 ... 12