colt banner

Author Topic: Uberti Leech & Rigdon  (Read 834 times)

Offline ShotgunDave

  • Sr. Member
  • ****
  • Posts: 439
  • Charcoal Burner
    • View Profile
Re: Uberti Leech & Rigdon
« Reply #15 on: March 02, 2019, 10:31:09 AM »
Thanks Fellas. I agree, the L&R is just a good looking gun.

This one is my favorite of all my guns. It just feels good in the hand and it runs like a Swiss watch now. No rattles, smooth and tight.

Pietta really could bring one to market very easily. And I'd snatch one up too G Dog.
"Never trust quotes from the internet"
-Abe Lincoln

Offline sourdough

  • Sr. Member
  • ****
  • Posts: 409
  • Newbie
    • View Profile
Re: Uberti Leech & Rigdon
« Reply #16 on: March 04, 2019, 12:52:03 PM »
I continue to wonder why Pietta doesn't offer a L&R.  They have all the parts - a round barrel assembly and plain cylinder from their Griswold to just put on a '51 frame. If they ever start selling those I'd snag me one ever so fast. 

Those are one helluva good lookin' revolver, like yours Shotgun.

G Dog, you must have the patience of Job if you think Pietta is ever going to market a L&R! I emailed Pietta a few times a couple of years ago about it, and the best response was something like "We'll think about it".

I think I will be dead and gone before that happens, so I decided to do it on my own. I bought a Pietta 1851 Navy .36 steel [CP] (2016) on a one-day sale from Cabela's for $170 shipped (yeah, back in the recent dark ages!), and now I have a Traditions Pietta 1851 Navy .36 steel [CT] (2018) I bought from Old South for $219 shipped. I bought the Traditions gun because I had heard that they were the cream of the Piettas (not), so I kept it intact to remind me of that fact.

I also bought a Pietta G&G [CN] (2015) from Cabela's for $220 shipped, and I think that may have been one of the last ones shipped from Sidney NE as Cabela's never offered it online again. When I got it, the first thing that came to mind was L&R!

Early last year I decided to use the Cabela's gun for my L&R, and I bought a Pietta smooth cylinder ($95) and a Pietta part octagon/part round barrel ($125) from VTI Gun Parts. I used the load-lever/rammer assembly, the wedge, and the wedge screw from the octagon barrel for the new barrel assembly. (Pietta 1851 Navy .36 "type" guns are like Legos.)

http://www.vtigunparts.com/store/shopdisplayproducts.asp?id=66&cat=Pietta+1851+Navy

My Pietta L&R:



The same barrel assembly/cylinder on my Pietta 1851 Navy 2nd Model .36 [CM] (2014) "tail" grip profile (my fantasy belt-size 1851 Navy Dragoon 2nd Model):



The octagon barrel and engraved cylinder found a new home.

I am well satisfied.

Regards,

Jim

« Last Edit: March 04, 2019, 02:46:16 PM by sourdough »

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 4700
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Uberti Leech & Rigdon
« Reply #17 on: March 04, 2019, 12:57:25 PM »
I am well satisfied.

As you should be. Nice work, Jim.
"You gonna pull those pistols, or whistle Dixie?"

Offline sourdough

  • Sr. Member
  • ****
  • Posts: 409
  • Newbie
    • View Profile
Re: Uberti Leech & Rigdon
« Reply #18 on: March 04, 2019, 03:57:41 PM »
Cap, thanks for the reply!

If one chooses to acquire a Pietta G&G for the barrel and cylinder only, EMF is the only source that I know of these days. As of today they are again out of stock, but last week they were in stock. That leads me to think that they are somewhat in demand and sell out quickly. Their price is $275 plus shipping. If one wants one get on their backorder want list.

Cabela's could sell a ton of them, but BPS seems to be lessening Cabela's stock of everything.

Glad I got mine.

Regards,

Jim
« Last Edit: March 04, 2019, 04:00:38 PM by sourdough »

Offline ssb73q

  • Hero Member
  • *****
  • Posts: 2849
  • Gunsmoke junkie
    • View Profile
Re: Uberti Leech & Rigdon
« Reply #19 on: Today at 04:04:30 AM »
Hi, a new Uberti Leech & Rigdon was purchased from Dixie Gun Works:

https://www.dixiegunworks.com/index/page/product/product_id/8657/product_name/RH0611+Uberti+Leech+and+Rigdon+Revolver

Externally the revolver is perfect in fit and finish. However, the internal parts show cost cutting by Uberti. The hand has burrs and the bolt face is very rough where it wouldn't be long before the cylinder bolt slot lead-ins were chewed up. The revolver is timed properly, but a bit rough. The revolver was made in 2017 and has no visible markings (date code, proof marks, etc.) other than the serial number on the exposed part of the frame. The date code and proof marks are hidden on the bottom of the frame that is covered by the brass trigger guard. The only barrel markings are on the bottom of the barrel.

Interesting that this Uberti revolver arbor and barrel arbor hole are tapered. The lockup with the wedge is very tight, in fact so tight that removing the barrel is difficult. The loading lever is required to pry the barrel off the frame. I wonder if this arbor taper is Uberti's solution to a short arbor? Other than adding a arbor length set screw, I may leave this taper alone that will probably loosen some with revolver use.

A reduced power spring will be installed in the revolver, the bolt face polished, and the hand deburred. I'm still not sure what I will do with the engraving on the cylinder.

The new revolver:

Regards,
Richard
There’s nothing better in the morning than the smell of bacon and black powder smoke!

Offline Hawg

  • Hero Member
  • *****
  • Posts: 1897
  • Now you went and done it!!!
    • View Profile
Re: Uberti Leech & Rigdon
« Reply #20 on: Today at 04:32:23 AM »
Cabela's could sell a ton of them, but BPS seems to be lessening Cabela's stock of everything.

Cabela's used to sell a lot of different models.  I can take my G&G and 51 navy and make a L&R or a S&G.
Do not meddle in the affairs of dragons, for thou art crunchy and tasteth good with ketchup.

Offline ShotgunDave

  • Sr. Member
  • ****
  • Posts: 439
  • Charcoal Burner
    • View Profile
Re: Uberti Leech & Rigdon
« Reply #21 on: Today at 10:22:50 AM »
She's a real beauty Richard, mechanical issues aside.

It looks like it has a nice piece of wood on it too.

I'm interested to know how you resolve the cylinder scene too.
"Never trust quotes from the internet"
-Abe Lincoln