colt banner

Author Topic: Get your kicks on Route '66  (Read 409 times)

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 4568
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Get your kicks on Route '66
« Reply #30 on: April 16, 2019, 12:00:29 PM »
Thanks for the info Capt. I'll order the cowboy does as well, since I don't have any yet. It will be great to exchange info. I'll probably go straight for BP in my loadings. Since it's currently what I'm shooting. This is gonna be fun!

I know, right? I feel like a kid getting ready for Christmas...
Just a bit of info...if you are going to buy pre-cast bullets (from Midway, or anyone else) they come available either with SPG lube (for black powder loads) or a different lube, for smokeless. While the SPG can be used on smokeless loads, the other way 'round isn't recommended.

You will find the Cowboy dies a bit pricey...but if you read the customer reviews, most felt they were well worth the extra cash outlay. They sure look good, anyway!


https://www.midwayusa.com/product/414634/rcbs-cowboy-3-die-set

Don't forget your shellholder (#35)

https://www.midwayusa.com/product/446170/rcbs-shellholder-35-38-40-wcf-44-40-wcf
« Last Edit: April 16, 2019, 12:04:14 PM by Captainkirk »
"You gonna pull those pistols, or whistle Dixie?"

Offline ShotgunDave

  • Sr. Member
  • ****
  • Posts: 304
  • Charcoal Burner
    • View Profile
Re: Get your kicks on Route '66
« Reply #31 on: April 16, 2019, 01:05:25 PM »
Thanks Capt.

I buy my bullets from here for my .45 Colt.

http://www.acmebullet.com/bullets-reloading-brass/44-40-CAL-Lead-Bullets

I'm probably going to try these for the 44-40 as well. The .45's load and shoot nice.

There's also these.

https://bulletsbyscarlett.com/shop?olsPage=products%2F200-grain-44-40-caliber-sized-427


I haven't tried Scarlett's bullets but I know folks that have. They rave about them, so I'll probably be trying them as well.

And you're very correct, it's a lot like Christmas, only better! I never got a gun or gun related gift for Christmas!
"Never trust quotes from the internet"
-Abe Lincoln

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 4568
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Get your kicks on Route '66
« Reply #32 on: April 17, 2019, 06:59:47 AM »
Dave, both bullets look nice, and reasonably priced. You might want to check and see if the lubes are BP compatible, though.

One thing I forgot to mention; if loading for .44-40 and BP, you may want to consider a compression die.

https://www.midwayusa.com/product/978844/montana-precision-swaging-black-powder-compression-die-with-stem-44-caliber

You can also buy the BACO plug to fit your RCBS dies, but not 100% they will fit the Cowboy dies. If I find out for sure I'll let you know.

https://www.buffaloarms.com/44-40-wcf-compression-plug-for-lyman-rcbs-bullet-expander-die-body-van4440rcp
« Last Edit: April 17, 2019, 07:09:03 AM by Captainkirk »
"You gonna pull those pistols, or whistle Dixie?"

Offline ShotgunDave

  • Sr. Member
  • ****
  • Posts: 304
  • Charcoal Burner
    • View Profile
Re: Get your kicks on Route '66
« Reply #33 on: April 17, 2019, 09:19:57 AM »
Thanks for the links Capt. That's something I didn't think of. A compression die is a good idea. I bet it helps saving the necks on the 44-40 case.
"Never trust quotes from the internet"
-Abe Lincoln

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 4568
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Get your kicks on Route '66
« Reply #34 on: April 17, 2019, 10:29:42 AM »
Thanks for the links Capt. That's something I didn't think of. A compression die is a good idea. I bet it helps saving the necks on the 44-40 case.
What it does is compress the dropped powder in the case to a universal distance in each and every case, as well to a universal amount of compression. This allows you to maximize case space (it's quite a stretch to get 40gr of powder into a .44-40 case, from what I hear, especially 2F) and hence allow you to seat your bullet on a wad over the charge. I'm sure you are well aware that BP needs to be compressed without air space between the bullet and powder (unlike smokeless); doing so in BPCR can have bad (if not disastrous) results. The compression die allows repeatable, exact results with BP. Compressing the powder using the bullet does not work well, if at all, and is highly discouraged. Some get by using a marked dowel rod to compress the powder to a pre-measured mark, but it's nowhere as uniform as using a compression die.
Since I do intend to load and shoot black powder in my Sharps, I will be buying a compression die for that cartridge (.45/70). I did read a few negative reviews on the Montana compression die; one feller said he had to chase the threads on the outside of the die to get it to thread into his press. If the BACO compression plug will fit my .45/70  Cowboy die, I might opt for that one, although I would prefer to have a dedicated comp die without having to disassemble anything and may end up just buying the whole shebang.
"You gonna pull those pistols, or whistle Dixie?"

Offline ShotgunDave

  • Sr. Member
  • ****
  • Posts: 304
  • Charcoal Burner
    • View Profile
Re: Get your kicks on Route '66
« Reply #35 on: April 17, 2019, 10:58:13 AM »
Oh yes Capt, I'm very aware of the catastrophic results of space between the powder and bullet. When I load my .45's I use a dowel to compress the powder before I seat the bullet. The last thing I want is a hand grenade.

What I was referring to before is, the tendency for the neck to crush when loading 44-40. I've read a lot about it and some guys seem to have the problem a lot, and others seldom or never do. I was thinking that if the powder is compressed before seating the bullet, then the bullet will enter the case mouth much easier and neck crushing will be minimized. Does that make sense? I've never loaded bottlenecked cases before.
"Never trust quotes from the internet"
-Abe Lincoln

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 4568
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Get your kicks on Route '66
« Reply #36 on: April 17, 2019, 11:07:50 AM »
Yes, makes sense. I've been reading about that as well. A lot of the problem will likely be alleviated by using the Cowboy dies as the expander die sizes the case to different dimensions than standard .44-40 dies, which are generally intended for jacketed or semi-jacketed bullets. If you read the customer reviews for the RCBS cowboy dies on the Midway site, a lot of customers have commented about this issue...enough for me to order them. I can't imagine having a good compression die could hurt matters any way you look at it.
Have you slugged your barrel yet? I would imagine if you could use the standard .44-40 bullet (.427) that would also help to not crush case necks.
And no, while I've loaded plenty of bottleneck rifle ammo, I would really consider the .44-40 a pistol cartridge rather than a rifle cartridge. It will be a learning experience for me as well.
"You gonna pull those pistols, or whistle Dixie?"

Offline ShotgunDave

  • Sr. Member
  • ****
  • Posts: 304
  • Charcoal Burner
    • View Profile
Re: Get your kicks on Route '66
« Reply #37 on: April 17, 2019, 11:16:18 AM »
Unfortunately I don't have my rifle in hand yet. It is actually being shipped today to my FFL guy. So once it arrives, it will be another 10 days before I get it, because of wonderful Kalifornia's waiting period. So it will be about the 30th before I have it.
"Never trust quotes from the internet"
-Abe Lincoln

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 4568
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Get your kicks on Route '66
« Reply #38 on: April 17, 2019, 11:19:23 AM »
Unfortunately I don't have my rifle in hand yet. It is actually being shipped today to my FFL guy. So once it arrives, it will be another 10 days before I get it, because of wonderful Kalifornia's waiting period. So it will be about the 30th before I have it.

That is pure torture.
Illinois is trying hard to outdo Kali as being #1 gun-hater haven in the US. I had to fill out background check paperwork to buy the Santa Barbara...a black powder revolver!!!!
"You gonna pull those pistols, or whistle Dixie?"

Offline ShotgunDave

  • Sr. Member
  • ****
  • Posts: 304
  • Charcoal Burner
    • View Profile
Re: Get your kicks on Route '66
« Reply #39 on: April 17, 2019, 11:38:04 AM »
Unfortunately I don't have my rifle in hand yet. It is actually being shipped today to my FFL guy. So once it arrives, it will be another 10 days before I get it, because of wonderful Kalifornia's waiting period. So it will be about the 30th before I have it.

That is pure torture.
Illinois is trying hard to outdo Kali as being #1 gun-hater haven in the US. I had to fill out background check paperwork to buy the Santa Barbara...a black powder revolver!!!!

Oh man! Even we don't have to do that. Black powder guns are still under the radar. At least for now.......

But you're right, waiting is pure hell!

What makes me the maddest is, they do an instant background check. They know right then if you are eligible to own a firearm. You could walk out with it. But they have the 10 day wait as a "cooling off period". Ridiculous.
« Last Edit: April 17, 2019, 11:40:04 AM by ShotgunDave »
"Never trust quotes from the internet"
-Abe Lincoln

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 4568
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Get your kicks on Route '66
« Reply #40 on: April 17, 2019, 11:52:38 AM »
Legally, I can still buy a BP gun without going through an FFL. But all the FFL shops are forced to play the game, even with BP.
One of the neat features of my LGS is they allow layaways...put your pittance down, they run the BG check right then and there...and when you come to pay off your gun, you can walk right out of the store with it.
"Cooling off period"...how stupid is that, really? Just another gimme brown-nose tactic for the libs showing them how much we are trying to play ball with them.
I wonder how many angry people have actually purchased a gun and used it in anger the same day, seriously? If you are really intent on shooting someone, do they really think three days (or 10, now) will make you change your mind? Not likely.
"You gonna pull those pistols, or whistle Dixie?"

Offline ShotgunDave

  • Sr. Member
  • ****
  • Posts: 304
  • Charcoal Burner
    • View Profile
Re: Get your kicks on Route '66
« Reply #41 on: April 17, 2019, 01:21:06 PM »
Legally, I can still buy a BP gun without going through an FFL. But all the FFL shops are forced to play the game, even with BP.
One of the neat features of my LGS is they allow layaways...put your pittance down, they run the BG check right then and there...and when you come to pay off your gun, you can walk right out of the store with it.
"Cooling off period"...how stupid is that, really? Just another gimme brown-nose tactic for the libs showing them how much we are trying to play ball with them.
I wonder how many angry people have actually purchased a gun and used it in anger the same day, seriously? If you are really intent on shooting someone, do they really think three days (or 10, now) will make you change your mind? Not likely.

I would be willing to bet money I don't have, that not one single "crime of passion" has ever been prevented by a waiting period. If someone is hell bent on shooting someone, the last place they're going to go is a gun shop.
"Never trust quotes from the internet"
-Abe Lincoln

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 4568
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Get your kicks on Route '66
« Reply #42 on: April 17, 2019, 01:25:03 PM »
I would be willing to bet money I don't have, that not one single "crime of passion" has ever been prevented by a waiting period. If someone is hell bent on shooting someone, the last place they're going to go is a gun shop.

Amen!
"You gonna pull those pistols, or whistle Dixie?"