1858banner

Author Topic: Now I gone and dunnit...  (Read 234 times)

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 5737
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Now I gone and dunnit...
« on: November 10, 2020, 08:08:58 AM »
Well, here we go...first .45 Colt BP cartridge round. Was playing around setting up the dies last night and figured I might as well run one off instead of doing a dummy round, so without further ado...

.45 Colt, 35gr by volume of 3F Graf powder (Goex) (32gr by measured weight) and a 250gr cast bullet for an approximate MV of 885fps...should be a real knuckle-thumper. COL @ 1.585 and taper crimped using RCBS 'Cowboy' dies.

"You gonna pull those pistols, or whistle Dixie?"

Offline 45 Dragoon

  • Hero Member
  • *****
  • Posts: 562
  • Newbie
    • View Profile
Re: Now I gone and dunnit...
« Reply #1 on: November 10, 2020, 09:02:19 AM »
Wow, looks good!!

Mike

Offline mazo kid

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3708
  • Newbie
    • View Profile
Re: Now I gone and dunnit...
« Reply #2 on: November 10, 2020, 09:03:38 AM »
I think, (no, I know) you are gonna like shooting those! Better load up a bunch of 'em as they get used up fast.

Offline ShotgunDave

  • Administrator
  • Hero Member
  • *****
  • Posts: 2349
  • Head Janitor, Floor Sweeper
    • View Profile
Re: Now I gone and dunnit...
« Reply #3 on: November 10, 2020, 09:26:46 AM »
Nicely done Capt.

I agree with Em, load a bunch. They're like Lay's potato chips, you can't have just one!
"Never trust quotes from the internet"
-Abe Lincoln

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 5737
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Now I gone and dunnit...
« Reply #4 on: November 10, 2020, 10:12:51 AM »
Nicely done Capt.

I agree with Em, load a bunch. They're like Lay's potato chips, you can't have just one!

I generally try not load too many before testing out a load. I guess 50 wouldn't hurt.
"You gonna pull those pistols, or whistle Dixie?"

Offline ShotgunDave

  • Administrator
  • Hero Member
  • *****
  • Posts: 2349
  • Head Janitor, Floor Sweeper
    • View Profile
Re: Now I gone and dunnit...
« Reply #5 on: November 10, 2020, 10:23:30 AM »
Not much to test here Capt. You've assembled a pretty standard .45 Colt load. Now get out there and make some smoke with em!
"Never trust quotes from the internet"
-Abe Lincoln

Offline Captainkirk

  • Administrator Extraordinaire and Part-Time Gunslinger
  • Administrator
  • Hero Member
  • *****
  • Posts: 5737
  • "Never said I didn't know how to use it" M.Quigley
    • View Profile
Re: Now I gone and dunnit...
« Reply #6 on: November 10, 2020, 10:48:32 AM »
Wow, looks good!!

Mike

Yeah, and that's about half of what that Walker conversion could handle. They don't make a .45 LOOOOOOOOONG Colt, do they?
Anybody tried this?
https://www.starlinebrass.com/454-casull-brass
« Last Edit: November 10, 2020, 10:53:31 AM by Captainkirk »
"You gonna pull those pistols, or whistle Dixie?"

Offline Miguel Loco

  • Sr. Member
  • ****
  • Posts: 440
    • View Profile
Re: Now I gone and dunnit...
« Reply #7 on: November 10, 2020, 10:56:58 AM »
I've been wanting to do that too.....just haven't taken the time to do it. Looks great!
"a dios rogando y con el mazo dando...y un buen cigarro"
-Mick

Offline 45 Dragoon

  • Hero Member
  • *****
  • Posts: 562
  • Newbie
    • View Profile
Re: Now I gone and dunnit...
« Reply #8 on: November 10, 2020, 01:24:40 PM »

[/quote]

Yeah, and that's about half of what that Walker conversion could handle. They don't make a .45 LOOOOOOOOONG Colt, do they?
Anybody tried this?
https://www.starlinebrass.com/454-casull-brass
[/quote]


I just happen to have  some 454 brass .  .  .    8)

As an aside, I'll be running some "hot" loads for testing the Colt open top pattern.  Hopefully I'll be using that as proof  for my argument that the open top pattern is stronger than the Remington pattern.    :-X

Mike


Offline mazo kid

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3708
  • Newbie
    • View Profile
Re: Now I gone and dunnit...
« Reply #9 on: November 10, 2020, 01:37:42 PM »
Just my opinion, but I don't think you will gain much, if anything, from using the longer brass. The chamber is only so long and the bullet has to go in there too. Now...I have used that longer brass to make shot loads for my 45s.

Offline ShotgunDave

  • Administrator
  • Hero Member
  • *****
  • Posts: 2349
  • Head Janitor, Floor Sweeper
    • View Profile
Re: Now I gone and dunnit...
« Reply #10 on: November 10, 2020, 01:57:27 PM »
Just my opinion, but I don't think you will gain much, if anything, from using the longer brass. The chamber is only so long and the bullet has to go in there too. Now...I have used that longer brass to make shot loads for my 45s.

But they're talking about a Walker chamber Em. Plenty of room for looooonger cases.
"Never trust quotes from the internet"
-Abe Lincoln

Offline Navy Six

  • Newbie
  • *
  • Posts: 26
  • Newbie
    • View Profile
Re: Now I gone and dunnit...
« Reply #11 on: November 10, 2020, 03:54:23 PM »
Captainkirk, that is pretty much the same load I just shot at a Cowboy match this past Sunday. No problem with knockdown targets!
Only Blackpowder is interesting.
"I'm the richest man in the world. I have a good wife, a good dog and a good sixgun". Charles A "Skeeter" Skelton

Offline mazo kid

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3708
  • Newbie
    • View Profile
Re: Now I gone and dunnit...
« Reply #12 on: November 10, 2020, 06:49:11 PM »
Just my opinion, but I don't think you will gain much, if anything, from using the longer brass. The chamber is only so long and the bullet has to go in there too. Now...I have used that longer brass to make shot loads for my 45s.

But they're talking about a Walker chamber Em. Plenty of room for looooonger cases.
OK, I missed that little bit. I was still on the 45 Colt. (l"